Home   |  Services   |  Products   |  Contact Us        
 Topics of Interest:  
 • Fire Industry News
 • Fire Links
 • How Does It Work?
 • FAQs
 • In Case of Fire
 • Training
 
FAQs

How do multi-class dry chemical fire extinguishers work?
If you ask any firefighter what it takes to create a fire, you will learn that you have to have three things:
1. A fuel - some sort of combustible solid, liquid or gas
2. Oxygen to react with the fuel
3. Heat - there must be enough heat to get the fuel above its flash point. There is paper on your desk right now that is surrounded by oxygen. It does not burn unless you get the paper hot enough.

If you want to put out a fire, you need to remove one of the three elements. When you watch firefighters battling a forest fire, they generally try to remove fuel or heat. Either they pour water on the fire to reduce the temperature, or they try to bulldoze strips of bare earth to eliminate the fuel.
A carbon dioxide fire extinguisher works by eliminating oxygen and replacing it with carbon dioxide. You could do the same thing with just about any non-oxidizing gas (nitrogen, for example), but carbon dioxide is inexpensive and easy to store.
Another way to cut off oxygen is to throw a blanket over the fire. Covering the fire with dirt or sand does the same thing. You might have heard that you can put out a kitchen fire by throwing baking soda or salt on the fire. Throwing sand would do the same thing, but most people have more salt in their kitchens than they have sand.
Dry chemical fire extinguishers are by far the most common fire extinguishers in the home. They can handle all three types of fires you would find in a kitchen or workshop: combustible solids like wood or paper, combustible liquids like gasoline or grease, and electrical fires. The idea behind a dry chemical fire extinguisher is to blanket the fuel with an inert solid (similar to dirt or sand). A dry chemical extinguisher sprays a very fine power of sodium bicarbonate (normal baking soda), potassium bicarbonate (nearly identical to baking soda), or monoammonium phosphate. These solids coat the fuel and smother the fire.

Back to FAQs
 
 
Industry Links
National Association of Fire Equipment Distributors
Ansul
Pyro Chem, Inc.
Occupational Safety & Health Administration
Badger Fire Protection
Amerex Corporation
more ...
Contact Us     PO Box 1259     Rocky Mount, NC  27802-1259